It is always better to avail professional pressure washing services in Ormond Beach. However, if you want to DIY, you have to have some basic knowledge for operating the pressure washer. Pressure washing is one of the most effective techniques for cleaning different types of exterior surfaces and some interior surfaces. A pressure washer does the job correctly when the combination of detergent, water flow, heat and water pressure is correct for the surface to be cleaned.
Driveways, parking lots, decks and other surfaces made of materials from wood to concrete can be easily cleaned with a pressure washer. However, the combination should be correct. There are different requirements and limitations for different materials and surfaces. For example, the pressure washer will break window glass into pieces if the pressure is more than the recommended. Therefore, don’t proceed if you doubt. Don’t make a guess and call professionals for pressure washing in Ormond Beach.
Gallons per Minute or Water Flow
4 to 6 gallons per minute with 1500 to 3,500 psi is ideal for most of the cleaning applications. However, this flow of water is not safe for wood. Use 500 to 1,000 psi when you are using chemicals to clean a wood surface. This will minimize furring. And, water flow must be less than 4 gallons per minute.
Pressure
The water pressure is measured in psi (pounds per square inch). It is the combination of water pressure, heat, and detergents that break oil, dirt and other materials on the surface. You can increase the efficiency of the pressure washer by increasing psi. However, too high psi can damage the surface. Therefore, rely on professional pressure washing services in Ormond Beach, if you are unaware of the right psi for a particular surface.
Nozzle
The nozzle determines the flow of water (gallons per minute) and water pressure (pounds per square inch). Both depend on the size of the orifice and spray angle of the nozzle. When the size of the nozzle is increased, the water flow (gallons per minute) remains constant and water (psi) is decreased. PSI increases when you are using a nozzle of smaller size. In most of the applications, the spray angle is of 25 and 40°. However, experience matters a lot when it comes to choosing the right nozzle for the application.
Detergents and Heat
Hot water and detergents improve cleaning efficiency. You need to use less detergent when water is hot. However, running hot water can damage the cold-water pressure washer. If you don’t have the right pressure washer, find professionals for pressure washing in Ormond Beach.
Soap and Sea 